-firmware download according to each Device
-research download + driver
-server download & driver
mentality & enthusiasm
-PC / laptop
FOLLOW STEP BY STEP
1.extrak firmware with research download
2.Open RSD, load the extracted firmware by clicking the gear icon on the top left corner when it's done, don't edit the RSD first.
3.Open the extracted RSD folder, open the image file / dwnloadfilexxxx folder
4.this sc77xx.xml << edit xml
open sc77xx.xml
match some of the numbers as below
########################################
<Partitions>
<!-- size unit is MBytes -->
<!--
<Partition id="splloader" size="0"/>
<Partition id="ubootloader" size="0"/>
-->
<Partition id="prodnv" size="5"/>
<Partition id="miscdata" size="1"/>
<Partition id="wmodem" size="8"/>
<Partition id="wdsp" size="2"/>
<Partition id="wfixnv1" size="1"/>
<Partition id="wfixnv2" size="1"/>
<Partition id="wruntimenv1" size="1"/>
<Partition id="wruntimenv2" size="1"/>
<Partition id="wcnmodem" size="1"/>
<Partition id="wcnfixnv1" size="1"/>
<Partition id="wcnfixnv2" size="1"/>
<Partition id="wcnruntimenv1" size="1"/>
<Partition id="wcnruntimenv2" size="1"/>
<Partition id="logo" size="1"/>
<Partition id="fbootlogo" size="1"/>
<Partition id="boot" size="15"/>
<Partition id="system" size="1150"/>
<Partition id="cache" size="150"/>
<Partition id="recovery" size="16"/>
<Partition id="misc" size="1"/>
<Partition id="userdata" size="2200"/>
<Partition id="internalsd" size="0xFFFFFFFF"/>
</
Partitions>############################################
PARTITION SYSTEM
Each calculation value is MB The example of the above system is 1.15 GB = 1150 MB Please adjust or use it as well Then save / save
PARTITION INTERNAL (Internal in kitkat kernel)
if you want to partition internally you only need to reduce this size <Partition id = "userdata" for example
if initially the size is like this <Partition id = "userdata" size = "2200" /> then you only need to reduce the size so <Partition id = "userdata" size = "1500" /> change the size as you wish the smaller the bigger
PARTITION USERDATA (INTERNAL IN LOLIPOP+ Kernel)
if you want to partition internally you only need to increase this size <Partition id = "userdata" for example <Partition id = "userdata" size = "5000"
• Turn back to RSD, click the 2nd gear icon from the top left • Select the backup tab, remove all check / checklist (the goal is that later when the flash process is not long) • Select the main page tab, click Packet, on the bottom right, please give whatever name is free, wait until the process is complete ... • Let me know how to uncheck NV_W with NV_WCN • If you have please flash the firmware that was edited earlier ..........: v
• after flash reboot to recovery original• Enter recovery ori 3Wipe reboot is correct ..
"THE ABOVE TUTOR HAS BEEN TRYED AND SAFE IN MY HH IF HAPPENED AT SOMETHING HP YOUR ALL,, IN MYSELF, SYA SHARE IS ALREADY TRYING" chances are you failed because: 1. You don't have permission and have not installed the driver 2. You don't have the parents' hands 3. Wrong step 4. The face must meet the requirements: v
SPECIAL BIG THANKS TO ALLAH SWT,
HADI KHOIRUDIN ALI MAHMUD
THANKS ALL FOR VISITING MY BLOG
